LilyPond Notation Reference: 2.7.2 Displaying chords

[ << Specialist notation ]	[Top][Contents][Index]	[ General input and output >> ]
[ < Chord inversions and specific voicings ]	[ Up : Chord notation ]	[ Printing chord names > ]

2.7.2 Displaying chords

Chords can be displayed by name, in addition to the standard display as notes on a staff.

[ << Specialist notation ]	[Top][Contents][Index]	[ General input and output >> ]
[ < Displaying chords ]	[ Up : Displaying chords ]	[ Customizing chord names > ]

Printing chord names

Chord names are printed in the ChordNames context:

\new ChordNames {
  \chordmode {
    c2 f4. g8
  }
}

Chords can be entered as simultaneous notes or through the use of chord mode. The displayed chord name will be the same, regardless of the mode of entry, unless there are inversions or added bass notes:

chordmusic = \relative {
  <c' e g>2 <f bes c>
  <f c' e g>1
  \chordmode {
    c2 f:sus4 c1:/f
  }
}
<<
  \new ChordNames {
    \chordmusic
  }
  {
    \chordmusic
  }
>>

When passed to a ChordNames context, rests (including multi-measure rests) cause the text “N.C.” (No Chord) to be displayed.

myChords = \chordmode {
  c1
  r1
  g1
  R1
  c1
}

<<
  \new ChordNames \myChords
  \new Staff \myChords
>>

\chords { … } is a shortcut notation for \new ChordNames \chordmode { … }.

\chords {
  c2 f4.:m g8:maj7
}

\new ChordNames {
  \chordmode {
    c2 f4.:m g8:maj7
  }
}

Selected Snippets

Showing chords at changes

By default, every chord entered is printed; this behavior can be modified so that chord names are printed only at the start of lines and when the chord changes.

harmonies = \chordmode {
  c1:m c:m \break c:m c:m d
}

<<
  \new ChordNames {
    \set chordChanges = ##t
    \harmonies
  }
  \new Staff {
    \relative c' { \harmonies }
  }
>>

Simple lead sheet

When put together, chord names, a melody, and lyrics form a lead sheet:

<<
  \chords { c2 g:sus4 f e }
  \new Staff \relative c'' {
    a4 e c8 e r4
    b2 c4( d)
  }
  \addlyrics { One day this shall be free __ }
>>

Customizing the no-chord symbol

By default, rests in a ChordNames context cause the “N.C.” symbol to be printed. This markup can be customized.

<<
  \chords {
    R1
    \set noChordSymbol = "—"
    R1
    \set noChordSymbol = \markup \italic "Ssh!"
    R1
  }
  {
    R1*3
  }
>>

See also

Music Glossary: chord.

Notation Reference: Writing music in parallel.

Snippets: Chords.

Internals Reference: ChordNames, ChordName, Chord_name_engraver, Volta_engraver, Bar_engraver.

Known issues and warnings

Chords containing inversions or altered bass notes are not named properly if entered using simultaneous music.

[ << Specialist notation ]	[Top][Contents][Index]	[ General input and output >> ]
[ < Printing chord names ]	[ Up : Displaying chords ]	[ Chord grids > ]

Customizing chord names

There is no unique system for naming chords. Different musical traditions use different names for the same set of chords. There are also different symbols displayed for a given chord name. The names and symbols displayed for chord names are customizable.

The basic chord name layout is a system for Jazz music, proposed by Klaus Ignatzek (see Literature list). (Other chord naming systems may be implemented through Scheme functions, as demonstrated by the “Chord names alternative” snippet in Chords.) A list of common jazz chords notations may be found on the chart in Chord name chart.

The default naming system may be tweaked easily in a number of ways. To begin with, predefined commands allow to use different languages for the root pitch. These include \germanChords, \semiGermanChords, \italianChords and \frenchChords:

German songbooks may indicate minor chords as lowercase letters, without any m suffix. This can be obtained by setting the chordNameLowercaseMinor property:

\chords {
  \set chordNameLowercaseMinor = ##t
  c2 d:m e:m f
}

The chord name display can also be tuned through the following properties.

chordRootNamer

The chord name is usually printed as a letter for the root with an optional alteration. The transformation from pitch to letter is done by this function. Special note names (for example, the German ‘H’ for a B-chord) can be produced by storing a new function in this property.

majorSevenSymbol

This property contains the markup object used to follow the output of chordRootNamer to identify a major 7 chord. Predefined options are whiteTriangleMarkup and blackTriangleMarkup.

additionalPitchPrefix

When the chord name contains additional pitches, they can optionally be prefixed with some text. The default is no prefix, in order to avoid too much visual clutter, but for small numbers of additional pitches this can be visually effective.

\new ChordNames {
  <c e g d'>    % add9
  \set additionalPitchPrefix = "add"
  <c e g d'>    % add9
}

chordNoteNamer

When the chord name contains additional pitches other than the root (e.g., an added bass note), this function is used to print the additional pitch. By default the pitch is printed using chordRootNamer. The chordNoteNamer property can be set to a specialized function to change this behavior. For example, the bass note can be printed in lower case.

chordNameSeparator

Different parts of a chord name are normally separated by a small amount of horizontal space. By setting chordNameSeparator, you can use any desired markup for a separator. This does not affect the separator between a chord and its bass note; to customize that, use slashChordSeparator.

\chords {
  c4:7.9- c:7.9-/g
  \set chordNameSeparator = \markup { "/" }
  \break
  c4:7.9- c:7.9-/g
}

slashChordSeparator

Chords can be played over a bass note other than the conventional root of the chord. These are known as “inversions” or “slash chords”, because the default way of notating them is with a forward slash between the main chord and the bass note. Therefore the value of slashChordSeparator defaults to a forward slash, but you can change it to any markup you choose.

\chords {
  c4:7.9- c:7.9-/g
  \set slashChordSeparator = \markup { " over " }
  \break
  c4:7.9- c:7.9-/g
}

chordNameExceptions

This property is a list of pairs. The first item in each pair is a set of pitches used to identify the steps present in the chord. The second item is a markup that will follow the chordRootNamer output to create the chord name.

minorChordModifier

Minor chords are often denoted via a ‘m’ suffix to the right of the root of the chord. However some idioms prefer other suffices, such as a minus sign.

\chords {
  c4:min f:min7
  \set minorChordModifier = \markup { "-" }
  \break
  c4:min f:min7
}

chordPrefixSpacer

The modifier for minor chords as determined by minorChordModifier is usually printed immediately to the right of the root of the chord. A spacer can be placed between the root and the modifier by setting chordPrefixSpacer. The spacer is not used when the root is altered.

Predefined commands

\whiteTriangleMarkup, \blackTriangleMarkup, \germanChords, \semiGermanChords, \italianChords, \frenchChords.

Selected Snippets

Chord name exceptions

The property chordNameExceptions can be used to store a list of special notations for specific chords.

% modify maj9 and 6(add9)
% Exception music is chords with markups
chExceptionMusic = {
  <c e g b d'>1-\markup { \super "maj9" }
  <c e g a d'>1-\markup { \super "6(add9)" }
}

% Convert music to list and prepend to existing exceptions.
chExceptions = #(append
  (sequential-music-to-chord-exceptions chExceptionMusic #t)
  ignatzekExceptions)

theMusic = \chordmode {
  g1:maj9 g1:6.9
  \set chordNameExceptions = #chExceptions
  g1:maj9 g1:6.9
}

\layout {
  ragged-right = ##t
}

<<
   \new ChordNames \theMusic
   \new Voice \theMusic
>>

chord name major7

The layout of the major 7 can be tuned with majorSevenSymbol.

\chords {
  c:7+
  \set majorSevenSymbol = \markup { j7 }
  c:7+
}

Adding bar lines to ChordNames context

To add bar line indications in the ChordNames context, add the Bar_engraver.

\new ChordNames \with {
  \override BarLine.bar-extent = #'(-2 . 2)
  \consists "Bar_engraver"
}

\chordmode {
  f1:maj7 f:7 bes:7
}

Volta below chords

By adding the Volta_engraver to the relevant staff, volte can be put under chords.

\score {
  <<
    \chords {
      c1
      c1
    }
    \new Staff \with {
      \consists "Volta_engraver"
    }
    {
      \repeat volta 2 { c'1 }
      \alternative { c' }
    }
  >>
  \layout {
    \context {
      \Score
      \remove "Volta_engraver"
    }
  }
}

Changing chord separator

The separator between different parts of a chord name can be set to any markup.

\chords {
  c:7sus4
  \set chordNameSeparator
    = \markup { \typewriter | }
  c:7sus4
}

See also

Notation Reference: Chord name chart, Common chord modifiers.

Essay on automated music engraving: Literature list.

Installed Files: ‘scm/chords-ignatzek-names.scm’, ‘scm/chord-entry.scm’, ‘ly/chord-modifiers-init.ly’.

Snippets: Chords.

Known issues and warnings

Chord names are determined from both the pitches that are present in the chord and the information on the chord structure that may have been entered in \chordmode. If the simultaneous pitches method of entering chords is used, undesired names result from inversions or bass notes.

myChords = \relative c' {
  \chordmode { c1 c/g c/f }
  <c e g>1 <g c e> <f c' e g>
}
<<
  \new ChordNames { \myChords }
  \new Staff { \myChords }
>>

[ << Specialist notation ]	[Top][Contents][Index]	[ General input and output >> ]
[ < Customizing chord names ]	[ Up : Displaying chords ]	[ Figured bass > ]

Chord grids

In some European countries, particularly France, jazz musicians use so-called ‘chord grids’, which notate chords visually by placing them in squares.

Although they are omitted in the rest of this section for brevity, it is recommended to use the following \paper settings for chord grids:

\paper {
  indent = 0
  ragged-right = ##f
}

indent = 0 ensures that the first line is not indented as it would normally be (see \paper variables for shifts and indents). ragged-right = ##f is necessary for single-line grids to ensure they span the whole page; see \paper variables for widths and margins.

In order to create a chord grid, instantiate a ChordGrid context.

\new ChordGrid \chordmode { c1 d1:m e1:7 f1:7+ }

Each square is automatically subdivided.

\new ChordGrid \chordmode {
  c1
  d2 c2
  e2. c4
}

Chords spanning a complete measure are centered within their square. Chords lasting half a measure take half the square, and those lasting a quarter of a measure take a quarter of the square. This summary picture shows the default rules for subdividing the square:

The \medianChordGridStyle changes the default display of squares with four chords of equal length to use the style recommended by Philippe Baudoin in his book Jazz, mode d’emploi (“Jazz, user instructions”).

\layout {
  \context {
    \ChordGrid
    \medianChordGridStyle
  }
}

In chord grids, rests cause the noChordSymbol to be printed, just like in a regular ChordNames context (see Printing chord names).

\new ChordGrid \chordmode { c1 r2 c2 R1 }

Skips cause blank space. They can occupy part of a square.

\new ChordGrid \chordmode { c1 s2 c2 s1 }

Selected Snippets

Customizing the chord grid style

Custom divisions of chord squares can be defined through the measure-division-lines-alist and measure-division-chord-placement-alist properties of ChordSquare. These are both alists. Their keys are measure divisions, namely lists which give the fraction of the measure that each chord (or rest, or skip) represents. More precisely, a measure division alist is made of positive, exact numbers adding up to 1, for example: '(1/2 1/4 1/4). The exactness requirement means that, e.g., 1/2 is valid but not 0.5.

The values in measure-division-lines-alist are lists of lines, which are represented as (x1 y1 x2 y2). The line starts at the point (x1 . y1) and ends at (x2 . y2). Coordinates are expressed in the [-1, 1] scale relative to the extent of the square.

The values in measure-division-chord-placement-alist are lists of (x . y) pairs giving the placement of the respective chords.

This example defines a peculiar chord grid style that has a rule for measures divided in three equal parts.

\paper {
  line-width = 10\cm
  ragged-right = ##f
}

\new ChordGrid \with {
  \override ChordSquare.measure-division-lines-alist =
    #'(((1) . ())
       ((1/3 1/3 1/3) . ((-1 -0.4 0 1) (0 -1 1 0.4))))
  \override ChordSquare.measure-division-chord-placement-alist =
    #'(((1) . ((0 . 0)))
       ((1/3 1/3 1/3) . ((-0.7 . 0.5) (0 . 0) (0.7 . -0.5))))
}
\chordmode {
  \time 3/4
  c2.
  c4 c4 c4
}

See also

Music Glossary: chord grid.

Internals Reference: ChordGrid, ChordGridScore, GridChordName, ChordSquare, Grid_chord_name_engraver, Chord_square_engraver.

[ << Specialist notation ]	[Top][Contents][Index]	[ General input and output >> ]
[ < Customizing chord names ]	[ Up : Displaying chords ]	[ Figured bass > ]

<< Back to Documentation Index

LilyPond — Notation Reference v2.24.4 (stable-branch).