%% Generated by lilypond-book
%% Options: [exampleindent=10.16\mm,indent=0\mm,line-width=160\mm]
\include "lilypond-book-preamble.ly"


% ****************************************************************
% Start cut-&-pastable-section
% ****************************************************************

#(ly:set-option 'eps-box-padding 3.000000)



\paper {
  indent = 0\mm
  line-width = 160\mm
  % offset the left padding, also add 1mm as lilypond creates cropped
  % images with a little space on the right
  line-width = #(- line-width (* mm  3.000000) (* mm 1))
}

\layout {
  
}




% ****************************************************************
% ly snippet:
% ****************************************************************
\sourcefilename "snippets/woodwind-diagrams-key-lists.ly"
\sourcefileline 0
%% DO NOT EDIT this file manually; it was automatically
%% generated from the LilyPond Snippet Repository
%% (http://lsr.di.unimi.it).
%%
%% Make any changes in the LSR itself, or in
%% `Documentation/snippets/new/`, then run
%% `scripts/auxiliar/makelsr.pl`.
%%
%% This file is in the public domain.

\version "2.23.13"

\header {
%% Translation of GIT committish: a8a85e19654e46d725563e6deba44083ef137a2c
  texidocja = "
以下のスニペットは、@code{scm/define-woodwind-diagrams.scm} に定義された、@c
木管楽器のダイアグラムにおける可能な調と、それに対応する移調設定のリストを@c
出力します。@c
リストはログファイルに出力され、音楽には影響しません。@c
コンソールに出力したい場合は、コマンドから
@code{(current-error-port)} を削除してください。
"
  doctitleja = "木管楽器のダイアグラムの調リスト"

%% Translation of GIT committish: 2f3474d9af596d677ed5b7ce720ae4d0954a6b51
  texidocit = "
Il seguente frammento produce un elenco di tutte le possibili chiavi e delle
loro impostazioni per i diagrammi per legni, come sono definite in
@code{scm/define-woodwind-diagrams.scm}.  L'elenco sarà visualizzato
nel file di log, ma non nello spartito.  Se si desidera che l'output appaia
nella console, omettere dai comandi @code{(current-error-port)}.

"
  doctitleit = "Elenco delle chiavi dei diagrammi per legni"

%% Translation of GIT committish: a3fd5364fc4f247579da0ed2bfea887ab37285c6
  texidocfr = "
Le code suivant permet d'obtenir une liste de toutes les possibilités en
matière de doigtés pour bois, tels qu'ils sont définis dans le fichier
@file{scm/define-woodwind-diagrams.scm}. Cette liste sera produite dans
le fichier de journalisation, mais pas sous forme de musique. Pour un
affichage en console, supprimez la partie @code{(current-error-port)}
des commandes.
"

  doctitlefr = "Liste des différents diagrammes de doigtés pour bois"

%% Translation of GIT committish: 262abf17c7827e88e3d509100c43920c8e225bec
  texidoces = "
El fragmento de código que aparece a continuación produce una lista de
todas las llaves y disposiciones de llave posibles para los diagramas
de posiciones de instrumentos de viento madera, tal y como están
definidos en @code{scm/define-woodwind-diagrams.scm}.  La lista se
muestra en el archivo de registro, pero no en la música.  Si desea una
salida por la consola, omita el @code{(current-error-port)} de las
instrucciones.

"
  doctitlees = "Listas de llaves para los diagramas de viento madera"

%%%    Translation of GIT committish: ab9e3136d78bfaf15cc6d77ed1975d252c3fe506

  texidocde="
Dieses Schnipsel erzeugt eine Liste aller möglichen Löcher und Locheinstellungen
für Holzbläserdiagramme, wie sie in der Datei
@file{scm/define-woodwind-diagrams.scm} definiert sind.  Die Liste wird
in der Log-Datei angezeigt, nicht in den Noten.  Wenn Ausgabe auf der Kommandozeile
gewünscht ist, muss  @code{(current-error-port)} von den Befehlen weggelassen
werden.

"
  doctitlede = "Liste der Löcher für Holzbläserdiagramme"


%% Translation of GIT committish: 262abf17c7827e88e3d509100c43920c8e225bec
  texidocca = "
El fragment de codi que apareix a continuació produeix una llista
de totes les claus i disposicions de clau possible per als diagrames
de posicions d'instruments de fusta, tal i com estan definits a
@code{scm/define-woodwind-diagrams.scm}.  La llista es mostra al
fitxer de registre, però no a la música.  Si es vol una sortida
per la consola, ometeu el @code{(current-error-port)} de les ordres.

"
  doctitleca = "Llistes de claus per als diagrames de vent fusta"

  lsrtags = "winds"

  texidoc = "
The snippet below produces a list of all possible keys and key settings
for woodwind diagrams as defined in
@code{scm/define-woodwind-diagrams.scm}.  The list will be displayed in
the log file, but not in the music.  If output to the console is
wanted, omit the @code{(current-error-port)} from the commands.
"

  doctitle = "Woodwind diagrams key lists"
} % begin verbatim


#(print-keys-verbose 'piccolo (current-error-port))
#(print-keys-verbose 'flute (current-error-port))
#(print-keys-verbose 'flute-b-extension (current-error-port))
#(print-keys-verbose 'tin-whistle (current-error-port))
#(print-keys-verbose 'oboe (current-error-port))
#(print-keys-verbose 'clarinet (current-error-port))
#(print-keys-verbose 'bass-clarinet (current-error-port))
#(print-keys-verbose 'low-bass-clarinet (current-error-port))
#(print-keys-verbose 'saxophone (current-error-port))
#(print-keys-verbose 'soprano-saxophone (current-error-port))
#(print-keys-verbose 'alto-saxophone (current-error-port))
#(print-keys-verbose 'tenor-saxophone (current-error-port))
#(print-keys-verbose 'baritone-saxophone (current-error-port))
#(print-keys-verbose 'bassoon (current-error-port))
#(print-keys-verbose 'contrabassoon (current-error-port))

\score {c''1}



% ****************************************************************
% end ly snippet
% ****************************************************************